Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece-- Most features can be completed in a single operation.  An optional locating pin ensures that yoiur part is placed accurately and, unlike other products, the spring-loaded clamp can be tightened with a simple hand-tool.

Our unique patent-pending Raptor dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion or clamp creep. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patent Pending

• Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
• Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
• Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 200 Inch Pounds.
• When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
• Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.