The RWP-008SS is a .281" wide dovetail holder for milling applications.  The RWP-008SS is designed to connect directly to a 54 mm System 3R pallet.  Using the 3R pallet reduces downtime by allowing the machine operator to load workpieces on an alternate pallet in seconds.

The RWP-008SS is manufactured from 17-4 Heat Treated Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece.  Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only .0469" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patent Pending

• Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
• Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
• Clamps must be tightened between 30 and 40 inch pounds of torque. DO NOT EXCEED 40 Inch Pounds.
• When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
• Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.