The RWP-012SS is a 1.5" wide dovetail holder for milling applications.  The RWP-012SS is designed to connect directly to your existing RWP-001 or RWP-001SS Fixture.  This allows you to quickly machine smaller size parts without taking your primary fixtures off of the machine.

The RWP-012SS is manufactured from 17-4 Heat Treated Stainless Steel.

Raptor Dovetail Fixtures are made to hold your part on four and five-axis CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece.  Most features can be completed in a single operation. Our unique Raptor Dovetail spring-loaded clamps require only 1/8" of material to hold the workpiece. That means less waste, easier prep and no distortion. You prepare all your parts with a single dovetail and utilize the same fixture for every part. Easy, strong and efficient.

Patent Pending

• Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
• Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
• Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 200 Inch Pounds.
• When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
• Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.