The RWP-401-11 is a dovetail fixture for Five Axis and Horizontal milling applications.  It offers superior clamping strength and good access to five sides of the workpiece.  The fixture can be used to hold one large workpiece or multiple pieces together along the same surface.  The RWP-401-11 utilizes a 1.5" dovetail width x .125” high.  This particular rail is 11” Long with six clamps, however, custom fixture lengths and various clamp configurations (more or less clamps) can easily be produced per your specifications.

This fixture is manufactured from 7075-T6511 aluminum.
NOTE:  The Raptor Rail is also manufactured from Heat Treated 17-4.

Raptor Dovetail Fixtures are made to hold your part on Five Axis and Horizontal milling CNC machines. The fixtures provide rigid clamping while exposing five faces of the workpiece.  Most features can be completed in a single operation.  Our unique Raptor Dovetail spring-loaded clamps require only .125" of material to hold the workpiece.  That means less waste, easier prep and no distortion.  You prepare all your parts with a single dovetail and utilize the same fixture for every part.  Easy, strong and efficient.

• Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
• Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
• Clamps must be tightened between 120 and 175 inch pounds of torque. DO NOT EXCEED 200 Inch Pounds.
• When machining your workpiece with the dovetail it is critical that you follow our sketches. Failure to do so may result in the workpiece coming loose and or damage to your fixture. Pay close attention to required sizes and radius requirements on the sketches.
• Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.

Qty of three 1/2-13 x 1.0 Socket head cap screws
Qty of two 1/2 x 1.0 Dowel Pin