|
|
Instructions and Guidelines
IMPORTANT
INSTRUCTIONS & GUIDELINES:
- Fixtures must be bolted down firmly to your Pallet or Table using the screws provided.
- Do not alter or replace any screw, spring or clamp with anything other than the exact item provided.
- Tighten clamps only to published torque limits. Do not exceed torque limits.
- When machining your workpiece with the dovetail it is critical that
you follow our sketches. Failure to do so may result in the workpiece
coming loose and or damage to your fixture. Pay close attention to
required sizes and radius requirements on the sketches.
- Failure to follow these instructions may result in injury or damage to your workpiece, tools, fixtures and/or machine.
|
|
